I am looking for a Hansen Mike Doyle Model bolt-thru Fin and hardware. Recently snagged a vintage board, and it did not have a fin.

If you can't find anything, I have some sailboard fin blanks I could shape to something close and thread it.
Do you have the screw so I could duplicate the threads?

-------------------------

spindrift

I had the same situation years ago with a Hansen. Those fins are hard to come by!

I wound up lining the fin box on the Hansen with wax paper. (you could use masking tape if you want). I set the fin i wanted to use. When it was set in position, i filled the finbox with resin and cabosil. After that set, the fin came out easily. I drilled into the fin from the deck hole and set a screw told it in place.

Worked great and didn't change the board/effect its value....

G

-------------------------
Love God, Hate Sin...

There is one on ebay right now (not sure if that's the type your looking for). Or oneworldsurf.com

Hah! Aren't we all

You should see if Dingpatch can make you one.