GONE!

-----

EDIT: Rack parts are out by the street, free to the first scavenger. Photo attached.



I've redone the surfboard storage in my garage, and have old parts in case anyone wants them.

They are two 10' long sections of 1" x 3.5" PVC, with a hole drilled about every 6 inches (about 3/4 of the way in with a drill press and flat hole bit, not all the way thru), and then all those PVC pipe sticks (about 16"). I have more PVC the same diameter in case you want to fill in the rest of that space.

I had them lying upright (like in the photo) on an elevated storage loft, and laid the boards on a rail in those slots. They slide smoothly over the PVC.

Edited: 05/19/2019 at 12:14 PM by RegularJoe